We Can’t Cover the Basics Enough

Got an interesting question via email recently. Here it is:
The issue I have is when shooting Recurve Barebow at a small target from distance, say shooting at a compound 40 cm target (just the 6 – 10 scorings rings available) from 18m whilst shooting a FITA 18, when using the arrow point to aim with I find the arrow tip covers the entire target. What would be best approach in this sort of situation?

Great question! Here’s my response:

* * *

The technique when using the point-of-aim (POA) technique is to align the bottom of the central aiming spot (visually) with the top of the arrow point (see illustration). You must then adjust your crawl or gap accordingly. This is more precise than hovering your point somewhere around the gold (worst case scenarios are having it wander around inside the gold with no place to settle and covering the gold entirely—your issue). Having the spot and the arrow point make a “figure 8” is much more precise and solves these problems.point-on-target-fig-eight

You do not need to use the central aiming dot, you can use any of the lower rings, but the smaller the dot the more precise the aim (the larger the circle, the harder to find the exact bottom. You can even use color differences between rings above the center to do this but, again, that is less precise (the top of the arrow and the rings are both convex, so it is hard to see when they are aligned correctly).

I actually had some success using a technique of mentally imagining an aiming dot (of contrasting color) which I can place anywhere on the target face. I used a cue like “7:30 in the blue” or “4:30 in the 5-ring” to make sure the dot was correctly located, and then touched the bottom of the dot with the top of my arrow tip and let fly. (Try it yourself. Look at the target in the illustration and imagine a green circular dot at 9 o’clock in the blue. Obviously you have to determine your crawls and or gaps based upon this technique and you need to size the dot according to the target face. I make the dot the width of one color ring as that can be replicated over and over.)

 

Advertisements

Leave a comment

Filed under For All Coaches, Q & A

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s