I have an Olympic Recurve student who is working through some issues and he wrote recently to ask (in part):
“I struggle to get through the clicker. Are there drills to work on to better expand through the clicker? I am interested in something physical to do.”
* * *
The first step in getting through the clicker is to have the clicker in the right place. So, having a helper allows you to do a clicker check. You simply draw through the clicker but instead of shooting, you continue to expand (until you can’t expand no more—Popeye) and the helper notes how far behind the trailing edge of the clicker your arrow point gets. (You must maintain good form and not allow your string hand, for example, to slide back on your face, or anything else that will get the arrow back farther: dropping your draw elbow, etc.) Your helper should see only a 1/4 inch (6 mm) gap between the clicker rear edge and the tip of the arrow point. If that gap is too narrow, the clicker needs to be adjusted outward. If too wide, adjusted inward. We are looking for a 1/4 in (6 mm) distance between the two. This is basically a measure of how close you are to the end of the range of motion of the back muscles you are using at full draw. (It is also, like all other measures of this type, an approximation.)
The key to getting through the clicker is relaxation. Tension shortens muscles, shortens the draw and makes it harder to get through the clicker. (This is why so many intermediate archers struggle when a competition gets hot.) So try this: set up to shoot, but let down after ever rep. Then with your eyes closed draw through your clicker and evaluate how relaxed you are when getting through the clicker. You are simply surveying your state of relaxation. Try relaxing your string hand. Try relaxing your torso. See if any of these attempts to relax non-critical parts of your shot have an effect on how easily you get through the clicker. If relaxation helps, then unwanted muscle tension is your issue. As you are doing this you are training your subconscious mind on the goal (getting through the clicker) and the map to the goal (relaxation).
You have to be on the lookout for any of the many subconscious “clicker cheats.” These will get you though the clicker but not with good form. If you struggle getting through your clicker the disappointment triggers subconscious “experiments” to get you through. One common example of such a cheat is the curling up of the string fingers, so if you notice extra tension in your string hand, that is an area to relax. Another common cheating response is to over extend on the bow side (which will spread your groups out L-R).
If in your most relaxed state, you do not get through your clicker easily, then the clicker probably needs to be moved out a very, very little. If you have the help of someone, have them watch several reps of the drill above (without reporting what they see each time). Then have them tell you where your clicker is after the draw, typically. If your draw is short, you will be asking the expansion to move the point too far and a struggle ensues. Ideally when the draw is finished and you hit anchor, the rear edge of the clicker blade should be on the point. The old guys referred to this as the clicker “hanging on the point.” If your draw doesn’t get you there, then the problem is not with your expansion, but with your draw.
The reason I comment on your faster shots looking smooth and strong is that when we become deliberate we almost always become short. Beginners often do this because their draw is still not as consistent as they want and since they don’t want to draw through the clicker when they are not ready, they draw cautiously and therefore draw short. The short draw then sets them up for a struggle to get through the clicker and a new set of issue ensues.
Let me know what happens if you try this.