I got a follow-up email regarding the Genesis tuning problem.
“With NASP unfortunately we can’t change the arrow in any way and must use the Easton 1820 “Genesis Arrow” so it seems we’re left to play with nock height and repeatable form. Is that how you see it?”
This is the case for official NASP competitions. My previous answer was for the broader archery community and competitions out it the wonderful world of archery outside of NASP. Here’s my answer to this email:
* * *
Yep, it is somewhat of a trap. The idea is to have a level playing field (same bow, arrow, target, distance) and I agree with that. Poor kids wouldn’t have the resources of richer kids to get their own arrows and have them fitted and tuned. But then each kid is stuck with identical equipment and to shoot well, equipment must be fitted to the archer and his/her abilities.
The only way to “weaken” an arrow like the Genesis competition arrow is to increase the point weight, and I am not sure that even that is allowed by NASP rules. The significant factor you seem to have control over is draw weight. If any of your kids are shooting anything less than full draw weight, getting them up to that will help. Also, you can do a little testing to see if there are bigger problems you do have control over. One of the things I see on a lot of Genesis bows are streaks on the arrow shelf and arrow rest. These are little smears of plastic left behind when fletches collide with the shelf/rest. For this reason, you want to clean off those surfaces regularly. A bad loose of the string by a beginner and Whack! there is a new streak. You won’t see it, though, if there are myriad others still there.
So for your really serious competitors, get a can of foot powder spray (it has to be powder). Spray the shelf and rest of their bows and have your archers shoot a couple of arrows. If there are any disturbances in the powder, you have a clearance problem. If you are shooting arrows with press-in rather than glue-on nocks (I think the old Genesis arrows had glue-ons), you can rotate the nock so that the fletch that was hitting no longer hits (since the arrow doesn’t start rotating until it is clear of the bow it is usually the bottom fletch). Re-test and rotate the nock until no more problem. Then make all of the other arrows the same by rotating their nocks into the same position. They make nock rotating tools that have built in guides for just this task (see photo below).
Since archers with different draw lengths have different string paths, you will need to test each bow-arrow-archer combination. (Bring lots of rags so that archers can clean up their bows afterward.)
If there are big streaks or the rest is getting hit, check the nocking point height. If the nocking point is too low, they will be launching their arrows “nock low” which is asking for clearance problems.
I do believe that you are allowed to adjust your draw weight, no? Having an arrow that stiff (spine is 0.592˝) would require the bow to be about 40#-45# to be shot correctly at that length, so reducing the draw weight would just make things worse, but turning the bow down just a bit (which changes the string path) may correct for a clearance issue so that may be worthwhile. If there is room to turn a child’s bow “up” a bit in draw weight, that might cure the clearance issue and provide better arrow flight.